There are many reasons for damage to the high-pressure nozzle, as long as we pay a little attention to the following small details in the process of use, we can reduce the chance of damage to the high-pressure nozzle. Thus extending the service life of the high-pressure nozzle. High-pressure nozzle damage causes are summarized in detail mainly contains the following points, respectively:

(a) the effect of corrosion caused by high pressure nozzle damage　　

When the high flow rate of liquid through the high-pressure nozzle holes in the metal surface, it will be on the nozzle holes corrosion of the adverse effects of the formation of the nozzle pressure drop, spray shape is also no rules to follow. High-pressure nozzle damage to the chance of corrosion depends on the hardness of the liquid, the spray pressure, the chemical materials used in the variety and its dosage. In addition, the liquid particles in the impurities also occur on the nozzle bad influence, therefore, in order to ensure the function of the nozzle, in the removal of high-pressure nozzle damage should be as little as possible with the more corrosive chemical removal.

(B) the use of improper methods can also cause high pressure nozzle damage　　

Wrong operation of the use and can not be protected in time is the primary cause of high-pressure nozzle accidental damage. Although in order to prevent damage - high-pressure nozzle mouth as far as possible depicted as a concave, but the offset layout of the fan-shaped nozzle is very easy to be jeopardized.

(C) the high temperature of the water medium caused by high-pressure nozzle damage

Assuming that the high-pressure nozzle for a long time in the high temperature or abnormal temperature operation, then it will cause the nozzle due to softening of the material was damaged, and then affect the normal operation of the high-pressure nozzle.

(D) poor spray will also cause damage to the high-pressure nozzle

Industrial nozzle chemical materials and impurities in the high-pressure nozzle internal or external edge of the accumulation will form a high-pressure nozzle flow is not smooth. This will affect the spray effect of the nozzle, and then affect the spray pressure.

(E) the corrosive nature of the chemical medium incurred high pressure nozzle damage.　　

In the removal of personnel selection of chemical materials spray cleaning removal target, these chemical materials on the high-pressure nozzle will form corrosive, and then affect the normal play of the nozzle function.

Caused by high pressure nozzle damage mainly due to the effect of corrosion, improper use, high-temperature water media, spraying, chemical media corrosive and other five, we pay attention to the following at the time of use, the use of the right nozzle in the appropriate field we can achieve good results, to extend the service life of the high-pressure nozzle it!