In the wake of the COVID pandemic, awareness and demand for disinfection has increased globally. The risk of contracting the disease can be minimized by keeping public places clean and disinfected. This is particularly important in high-traffic areas such as hospitals, schools, airports and transportation hubs, where crowds congregate and the potential for disease transmission is greater. Regular disinfection can help to reduce the spread of disease, which in turn reduces sick leave for employees, students and others who frequent public places.

In order to achieve good results when painting MDF, the surface must be completely free of sawdust and dirt. The company's existing solution applied their own air knife and nozzle design, but lacked the knowledge of how to make the air blades more efficient to use. As a result, there were still many problems with the existing solution, such as high decibel noise levels that violated the company's regulations, so the company was actively working to reduce noise levels in their production.

A coal producer needed to dissipate methane gas from an underground mine to avoid ignition and explosion. Certain specific areas are close to the methane gas source and are considered unsafe due to the higher concentration of methane gas. Saturating the air with humidity would prevent the methane gas from igniting. The use of hydraulic nozzles on continuous miners does not produce the fine droplets needed to humidify the air.

A large international beef processor needed a more efficient way to freeze beef carcasses. The process required 189,271 liters of chilled water to be continuously sprayed on the carcasses over 18 to 20 hours to prevent weight loss and crumpling. Previous systems have not been able to fully spray the carcass and have required longer freezing times. As a result, the mass and size of the beasts were reduced, resulting in unnecessary loss of revenue. In addition to this, the previous equipment produced a water spray that resulted in ice buildup on the rails and equipment structure. The nozzles also required frequent maintenance and constant monitoring to keep the freezer operational and safe. The beef processor sought a better misting system to improve freezer efficiency, ensure complete spraying of carcasses and reduce maintenance requirements.

A company's fluid testing group recently designed a customized lubrication cleaning machine for a customer manufacturer of aluminum castings. Aluminum casting producers need to clean and dry aluminum plates after laser cutting, a critical process because subsequent welding requires that the plate surfaces be clean and dry. Initially, the plates were cleaned manually with a high pressure washer and dried with a compressed air gun, but this was labor intensive and ineffective, as the plates were often dirty and often rusted when dried incompletely.